Description

Triad’s Open Stringer Saw (OSS) was designed to increase productivity and cut a perfect stringer every time. The OSS is powered by two soft start motors and uses two 30”x 80 tooth carbide tipped blades. The OSS is PC controlled and has automatic indexing and cutting. An in-feed and out-feed roller conveyor comes as standard equipment with the unit.

Specifications*

• Electrical …

Description

Triad’s Open Stringer Saw (OSS) was designed to increase productivity and cut a perfect stringer every time. The OSS is powered by two soft start motors and uses two 30”x 80 tooth carbide tipped blades. The OSS is PC controlled and has automatic indexing and cutting. An in-feed and out-feed roller conveyor comes as standard equipment with the unit.

Specifications*

• Electrical …

Description

The Triad Vertical S-Cat (Sub-Component Assembly Table) works together with the Triad Ro-Cat, enabling the pre-assembly of window and door bucks as needed. This can be done ahead of and in-line with the framing station. The S-Cat allows the operator to pre-fasten cripples to sills and headers. No set-up is required so the Triad Vertical S-Cat is always ready to accept the next …

Features and Specifications*

• Used for the easy movements of pre-built rough opening components
• Heavy duty construction withstands everyday use
• Each wheel is equipped with bearing grease zerks in axle and swivel assembly, provides easy movement
• Mar-resistant wheels
• Ideal for use in mills and virtually all warehouse manufacturing applications
• Dimensions: 92"H x 60"W x 60"L …

Description

The Triad Power Chain Conveyor provides rugged and sure transport of wall panels between stations - all at the push of a button.

Sets of Power Chain Conveyor can also be configured to be interoperable with other conveyor sets, tables, and/or the Triad Transfer Station.

Capacity and Specifications*

• Heavy duty construction withstands everyday use
• Custom built: 16’ to 48’ long in 4’ …

Capabilities & Specs

• Frame: Formed Steel Channel
• Rollers: 1.9" X 16 ga. Steel or Galvanized tubing with smooth ends.
• Bearings: Integral labyrinth sealed ball bearings
• Zinc plated and grease packed
• Capacity: 250 lbs. per roller, or max. of 1300 lbs. distributed live load per 10’ section with supports at 10’ centers
• 3200 lbs. max. live load with 5’ centers
• Height …

Description

Triad’s Open Stringer Saw (OSS) was designed to increase productivity and cut a perfect stringer every time. The OSS is powered by two soft start motors and uses two 30”x 80 tooth carbide tipped blades. The OSS is PC controlled and has automatic indexing and cutting. An in-feed and out-feed roller conveyor comes as standard equipment with the unit.

Specifications*

• Electrical …

Description

Triad’s Diamond Quad Squaring/Sheathing Table was designed to be utilized in a two table wall panel system. The DQ Squaring Table is a means to keep an already framed wall clamped and squared while routing out rough openings with the Triad Handle Bar Router or Triad Router Bridge.

Move the table in and out with a drum switch to adjust for different wall heights. Custom sizes are …

Description

Triad’s unique PreStage Framing Table is like nothing else on the market. It merges a pre-layout material staging area with a fast, efficient, framing station. As one unit, the pre-staged materials (for example, studs, plates, and premade components) are stacked and then transported via a powerful continuous track system to the framing area. This continuous track lays flush with the …

Description

Triad’s Generation 3 Framing Table is custom built for 16’ to 80’ long walls (your choice of maximum length), and offers the greatest wall height range of any Triad Framing Table: With wall heights from 3'9" to 16'3" you can do anything from knee walls to commercial building wall panels. Studs are placed between color-coded stud locators. With just a push of a …

Description

The Sheathing Delivery System (SDS) is an available feature for all Triad framing tables and can be retrofitted on any Triad wall system. With the Sheathing Delivery System, sheathing is delivered on a magazine. There are three magazines that come with the standard system. The cart is turned perpendicular to the table and rides on a track automatically. As the sheathing slide offs by …

Description

Triad’s The Diamond Quad Framing Table comes fully assembled and reduce your building costs down while building quality, square, and accurate walls.

Color-coded stud locating flippers are exclusive to Triad. The locator brackets are slotted in order to assure exact center placement during table setup.

Roller bearing mounted, Speed Dollies, each with one tool, provide sure and accurate …

Description

Triad’s Stud Stitcher Bridge is a one-man framing operation designed for use with the Gen II Framing Table. The operator guides the Stud Stitcher Bridge over a clamped wall and the bridge is ready to fire. The Stud Stitcher clamps the stud horizontally and vertically and places four nails (two on each side of a 2x4 wall) simultaneously fastening both plates and stud. The operator …

Description

You’ll find many of the same features on the Mobile Diamond Quad as on the popular stationary Diamond Quad Framing Table. However, there are also several unique features: The center tube structure doubles as an air compressor tank (powering the pop-up roller conveyors, even in the field). You no longer have to haul material over the road and set-up time is accomplished in …

Description

A great tool dolly is one that your operators WANT to use and makes your entire wall panel line more productive. Our engineering department took a fresh look at the tool dolly and knew that Triad could do it better.

The result is the fastest and most labor-saving tool dolly ever! No more lifting the dolly into the firing position. That’s now handled by pushbutton actuated air …

Description

The Econo-Framer is our most economical motorized framing table, redesigned to take advantage of the newest manufacturing methods, and suitable for plant or job site usage.

The standard Econo-framer has one fixed side and one motor-driven adjustable outrigger side. Standard wall heights range from 6’ 3" to 10’ 3". The optional tall wall Econo-framer (pictured) has …

Description

The Triad WorkTable was designed to handle the construction of any non-standard panel or components that would otherwise bog down your production line. It’s usage is limited only by your imagination, but some examples include short walls, tall walls, rake walls, or walls that are mostly opening (and very little wall space. It is economical, simple and extremely flexible. One side …

Description

Triad’s Easy Framer is our most economical framing table. It combines a table for accurate alignment with the best nailing components available to turn out better quality work faster and for greater profit - in the factory or on the job site!

All part alignment work is done at the factory. To assemble the table, simply match numbered sections, level and adjust to your desired …

Description

Especially handy for making wise use of limited square footage, the Triad Pop-Up Friction Station will turn any wall panel conveyor into a quick sturdy table (for example for routing out openings after sheathing, with a Triad Handlebar Router). The Pop-Up Friction Station, sits in the middle of any roller conveyor or skate wheel conveyor. When desired, it can pop-up a sheathed wall …

Description

Triad’s Router Bridge allows you to router your wall panel openings, such as windows and doors, as an integral part of your process. The dedicated router bridge can be placed over a Triad Framing Table (in a single table workcell system) OR over a Triad Sheathing/Squaring Table (in a two table workflow, which allows your framing table to be working on the next panel, for increased …

Description

Easily and economically route your wall panel openings with the (2 person) Triad Handlebar Router! Designed with safety, convenience, and long life, the popular Handlebar Router features:

• On and off switch on either end of handlebars
• Low center of gravity for easier handling & maneuverability
• Black phenolic bottom plate reduces surface friction
• 2400 RPM for faster clean cutting. …

Description

The ultimate sheathing bridge, for precision, versatility, automation, and SPEED

The industry is sitting up and taking notice of the incredible Triad ProFusion Bridge. It is so popular that we are often building sold units two or three at a time. Why? It’s FAST and accurate. Six separate high-capacity nailing tools (front side and back side) intelligently divide the work using …

Description

The Trident Sheathing Bridge is a very popular sheathing bridge choice. Why? 3 high-capacity nailers giv builders flexibility without compromising speed and efficiency, while at the same time significantly reducing tool cost over traditional bridges nailing bridge. Can be operated in your choice of Fully Manual mode, Semi-Automatic mode, or Automated (virtually unmanned) operation.

The …

Description

Take all time-consuming walls off the primary productions line with the Triad Rake Wall Table. This table produces accurate, quality rake walls and balloon walls that help you focus on your overall lineal footage output to make a more consistent product.

The table has a manually adjustable rake side, 0 to 12/12 pitch.

There are tool dollies, each holds a nailing tool, on the straight …

Description

The Ro-Cat, rough opening component assembly table, takes pre-nailed sub-components and squares the units as an operator joins them to make window and door openings.

By activating the pop-up rollers, the finished window or door buck is pushed off onto a Ro-Cat conveyor, staged for the next wall to be built.

It is easy to use, with no set-up and designed for one man operation. The …

Description

There is a reason that Triad’s Flow-Through Component Nailer is one of its most popular component machines. It was designed to cover all component manufacturing needs. It has adjustable, mounted guns allowing for unmatched versatility. With foot pedal firing, the nailer provides the speed rates required in high product operations. The Flow-Through Component Nailer is ideal for …

Description

Triad’s CN-4 enables you to build necessary components such as: corners, trimmers, partition lead-ins, (and more) with nailing tools in the side position.The superior design and heavy construction of the Triad CN-4 results in truly square clamping results. It provides accurately material placement, presses, and then nails the parts. A stop is provided to limit accidental nailing …

Description

The Triad Duo-4 is designed for quick size changes to accommodate either floor trusses or ladders. Clamping is from two directions to ensure tight joints and rigid finished products. The moving bridge completely retracts to accommodate lift-off of the finished product. The studs or ladder rungs are positioned on 16" centers, using stud locators. End squaring stops square up the …

Description

Triad’s Floor Deck/Cassette System can handle I-joists, LVL, open web floor truss configurations, or dimensional lumber, giving your “room-to-grow” and multiple material options. With a 4000 lb capacity Material Handling Deck that moves the length of the table, your output can soar.

With clamping joist locators and rim fastening/framing, floor cassette widths from 6’ …

Description

Triad’s Floor Builder System is a combination Framing Table, Material Bridge, and Decking Bridge (which can be outfitted with your choice of compatible nail or screw guns). The system accommodates 2x8 through 2x12 dimensional lumber, floor trusses, and I-joists. They can span either width or length within the table.

The system includes: framing table, material bridge, and …

Description

For floor decks built with dimensional lumber (only) the Triad Floor Panel System is an economical choice for framing & decking. Floor joists can be either 2x10 or 2x12 dimensional lumber. Other features include:

• Rim Fastening/Framing
• Clamping joist locators
• A 4000 lb capacity Material Handing Deck
• Your choice of compatible decking tools (for nail or screw floor deck fastening) …