Description

The NexusSteel Table for Steel Stud Framing can handle rake walls, tall walls, knee walls, balloon walls, gable walls, and more IN ADDITION to serving as a “standard” Generation 3 Framing Table. Available to accommodate different wall heights and lengths - our most versatile steel table!

With one stationary end AND one adjustable, pivoting end, (for a 0 to 12/12 pitch), …

Description

The Triad Tilt Ro-Cat (Rough Opening Component and Assembly Table) takes a pre-nailed steel header and sill units and provides the means to square the units as an operator joins them to a pair of trimmers. This table is exclusively for steel framing.

The Tilting feature give you access to the backside of the finished wall, or for offloading to a near-vertical position to a rough …

Description

The Triad Vertical S-Cat (Sub-Component Assembly Table) works together with the Triad Ro-Cat, enabling the pre-assembly of window and door bucks as needed. This can be done ahead of and in-line with the framing station. The S-Cat allows the operator to pre-fasten cripples to sills and headers. No set-up is required so the Triad Vertical S-Cat is always ready to accept the next …

Description

Triad’s VersaSteel Framing Table can build walls 16’ to 80’ long and is adjustable in width (wall heights) from 6’9” to 16’3” (custom sizes available upon request). This table is designed to increase your facility’s production capabilities for steel stud wall panels.

Materials are quickly set utilizing Triad’s stud locator flippers, then fastened effortlessly with the Triad …

Description

The Triad Steel Stud Framing Table is designed for ease in operation and minimal set-up time to drastically increase production capabilities of complete steel stud wall panels.

The Steel Stud Framer can be used for squaring, framing, and sheathing operations. Materials can be laid-up quickly using our color-coded stud locator flippers. The studs can then be fastened quickly with the …

Features and Specifications*

• Used for the easy movements of pre-built rough opening components
• Heavy duty construction withstands everyday use
• Each wheel is equipped with bearing grease zerks in axle and swivel assembly, provides easy movement
• Mar-resistant wheels
• Ideal for use in mills and virtually all warehouse manufacturing applications
• Dimensions: 92"H x 60"W x 60"L …

Description

Take all time-consuming walls off the primary productions line with the Steel Rake Wall Framing Table. This table will produce accurate and quality rake walls and balloon walls that allow your main wall line to focus on producing your “bread and butter” - your overall lineal footage output and more consistent product.

The Steel Rake Wall Table has a manually adjustable rake …

Description

The Triad Specialty Steel Stud Framing Table was designed to handle the problems aligned with labor and space intensive rake and gable walls. Take all the time consuming specialty walls off your primary line with this framing table. It will allow you to focus your overall output on a better quality product.

Triad’s Steel Stud Specialty Wall Table has one stationary end and one …

Description

This is the tool dolly that is compatible with any Triad Steel Stud Framing table. Glides smoothly on table side rails. Cord management is cleanly handled by an expanding and contracting Gortrac cable carrier that rolls up or expands, based upon the dolly’s position along the table rails.

• Simultaneously screws both top and bottom tracks at the same time
• You can independently …

Capabilities & Specs

• Frame: Formed Steel Channel
• Rollers: 1.9" X 16 ga. Steel or Galvanized tubing with smooth ends.
• Bearings: Integral labyrinth sealed ball bearings
• Zinc plated and grease packed
• Capacity: 250 lbs. per roller, or max. of 1300 lbs. distributed live load per 10’ section with supports at 10’ centers
• 3200 lbs. max. live load with 5’ centers
• Height …

Description

This XPL-S Panel Lift is engineered especially for STEEL STUD wall panels from 4" to a whopping 12" thick & 1000 lbs.

The Triad line of Panel Lifts come ready to bolt together (1 bolt!) and attach to your existing overhead power hoist (or fork lift chain). The constant sizing feature allows the panel lift to be put into place without pushing and pulling by the operator. …

Description

The Sheathing Delivery System (SDS) is an available feature for all Triad framing tables and can be retrofitted on any Triad wall system. With the Sheathing Delivery System, sheathing is delivered on a magazine. There are three magazines that come with the standard system. The cart is turned perpendicular to the table and rides on a track automatically. As the sheathing slide offs by …

Description

Triad’s Router Bridge allows you to router your wall panel openings, such as windows and doors, as an integral part of your process. The dedicated router bridge can be placed over a Triad Framing Table (in a single table workcell system) OR over a Triad Sheathing/Squaring Table (in a two table workflow, which allows your framing table to be working on the next panel, for increased …