Description

The Triad Tilt Ro-Cat (Rough Opening Component and Assembly Table) takes a pre-nailed steel header and sill units and provides the means to square the units as an operator joins them to a pair of trimmers. This table is exclusively for steel framing.

The Tilting feature give you access to the backside of the finished wall, or for offloading to a near-vertical position to a rough …

Description

The Triad Vertical S-Cat (Sub-Component Assembly Table) works together with the Triad Ro-Cat, enabling the pre-assembly of window and door bucks as needed. This can be done ahead of and in-line with the framing station. The S-Cat allows the operator to pre-fasten cripples to sills and headers. No set-up is required so the Triad Vertical S-Cat is always ready to accept the next …

Description

Triad’s Flow-Through Steel Header machine, allows you to build a more consistent quality steel header, in less time - maximizing your available labor. Multiple header sizes are possible.

Assemble your pieces on the mandrel, which provides a square, internal support. Adjust the width of the screw dollies, from 4" up to 16" apart. Feed the mandrel with header into the …

Description

The Ro-Cat, rough opening component assembly table, takes pre-nailed sub-components and squares the units as an operator joins them to make window and door openings.

By activating the pop-up rollers, the finished window or door buck is pushed off onto a Ro-Cat conveyor, staged for the next wall to be built.

It is easy to use, with no set-up and designed for one man operation. The …

Description

There is a reason that Triad’s Flow-Through Component Nailer is one of its most popular component machines. It was designed to cover all component manufacturing needs. It has adjustable, mounted guns allowing for unmatched versatility. With foot pedal firing, the nailer provides the speed rates required in high product operations. The Flow-Through Component Nailer is ideal for …

Description

Triad’s CN-4 enables you to build necessary components such as: corners, trimmers, partition lead-ins, (and more) with nailing tools in the side position.The superior design and heavy construction of the Triad CN-4 results in truly square clamping results. It provides accurately material placement, presses, and then nails the parts. A stop is provided to limit accidental nailing …

Description

The Triad Duo-4 is designed for quick size changes to accommodate either floor trusses or ladders. Clamping is from two directions to ensure tight joints and rigid finished products. The moving bridge completely retracts to accommodate lift-off of the finished product. The studs or ladder rungs are positioned on 16" centers, using stud locators. End squaring stops square up the …