Description

The NexusSteel Table for Steel Stud Framing can handle rake walls, tall walls, knee walls, balloon walls, gable walls, and more IN ADDITION to serving as a “standard” Generation 3 Framing Table. Available to accommodate different wall heights and lengths - our most versatile steel table!

With one stationary end AND one adjustable, pivoting end, (for a 0 to 12/12 pitch), …

Description

Triad’s VersaSteel Framing Table can build walls 16’ to 80’ long and is adjustable in width (wall heights) from 6’9” to 16’3” (custom sizes available upon request). This table is designed to increase your facility’s production capabilities for steel stud wall panels.

Materials are quickly set utilizing Triad’s stud locator flippers, then fastened effortlessly with the Triad …

Description

The Triad Steel Stud Framing Table is designed for ease in operation and minimal set-up time to drastically increase production capabilities of complete steel stud wall panels.

The Steel Stud Framer can be used for squaring, framing, and sheathing operations. Materials can be laid-up quickly using our color-coded stud locator flippers. The studs can then be fastened quickly with the …

Description

Take all time-consuming walls off the primary productions line with the Steel Rake Wall Framing Table. This table will produce accurate and quality rake walls and balloon walls that allow your main wall line to focus on producing your “bread and butter” - your overall lineal footage output and more consistent product.

The Steel Rake Wall Table has a manually adjustable rake …

Description

The Triad Specialty Steel Stud Framing Table was designed to handle the problems aligned with labor and space intensive rake and gable walls. Take all the time consuming specialty walls off your primary line with this framing table. It will allow you to focus your overall output on a better quality product.

Triad’s Steel Stud Specialty Wall Table has one stationary end and one …

Description

This is the tool dolly that is compatible with any Triad Steel Stud Framing table. Glides smoothly on table side rails. Cord management is cleanly handled by an expanding and contracting Gortrac cable carrier that rolls up or expands, based upon the dolly’s position along the table rails.

• Simultaneously screws both top and bottom tracks at the same time
• You can independently …

Description

The Triad AlphaSteel Framing Table utilizes Triad’s exclusive flippers for stud locations at 16” and 24” oc without time consuming measuring and marking. Where members such as trimmers or studs must be located, material is butted against one side of the flipper. Each arm can be depressed independently.

Adjustable squaring stops for track placement insure accurately assembled walls the …

Description

This XPL-S Panel Lift is engineered especially for STEEL STUD wall panels from 4" to a whopping 12" thick & 1000 lbs.

The Triad line of Panel Lifts come ready to bolt together (1 bolt!) and attach to your existing overhead power hoist (or fork lift chain). The constant sizing feature allows the panel lift to be put into place without pushing and pulling by the operator. …

Description

Triad’s unique PreStage Framing Table is like nothing else on the market. It merges a pre-layout material staging area with a fast, efficient, framing station. As one unit, the pre-staged materials (for example, studs, plates, and premade components) are stacked and then transported via a powerful continuous track system to the framing area. This continuous track lays flush with the …

Description

Triad’s Generation 3 Framing Table is custom built for 16’ to 80’ long walls (your choice of maximum length), and offers the greatest wall height range of any Triad Framing Table: With wall heights from 3'9" to 16'3" you can do anything from knee walls to commercial building wall panels. Studs are placed between color-coded stud locators. With just a push of a …

Description

Triad’s The Diamond Quad Framing Table comes fully assembled and reduce your building costs down while building quality, square, and accurate walls.

Color-coded stud locating flippers are exclusive to Triad. The locator brackets are slotted in order to assure exact center placement during table setup.

Roller bearing mounted, Speed Dollies, each with one tool, provide sure and accurate …

Description

Triad’s Stud Stitcher Bridge is a one-man framing operation designed for use with the Gen II Framing Table. The operator guides the Stud Stitcher Bridge over a clamped wall and the bridge is ready to fire. The Stud Stitcher clamps the stud horizontally and vertically and places four nails (two on each side of a 2x4 wall) simultaneously fastening both plates and stud. The operator …

Description

You’ll find many of the same features on the Mobile Diamond Quad as on the popular stationary Diamond Quad Framing Table. However, there are also several unique features: The center tube structure doubles as an air compressor tank (powering the pop-up roller conveyors, even in the field). You no longer have to haul material over the road and set-up time is accomplished in …

Description

A great tool dolly is one that your operators WANT to use and makes your entire wall panel line more productive. Our engineering department took a fresh look at the tool dolly and knew that Triad could do it better.

The result is the fastest and most labor-saving tool dolly ever! No more lifting the dolly into the firing position. That’s now handled by pushbutton actuated air …

Description

The Econo-Framer is our most economical motorized framing table, redesigned to take advantage of the newest manufacturing methods, and suitable for plant or job site usage.

The standard Econo-framer has one fixed side and one motor-driven adjustable outrigger side. Standard wall heights range from 6’ 3" to 10’ 3". The optional tall wall Econo-framer (pictured) has …

Description

Triad’s Easy Framer is our most economical framing table. It combines a table for accurate alignment with the best nailing components available to turn out better quality work faster and for greater profit - in the factory or on the job site!

All part alignment work is done at the factory. To assemble the table, simply match numbered sections, level and adjust to your desired …

Description

Especially handy for making wise use of limited square footage, the Triad Pop-Up Friction Station will turn any wall panel conveyor into a quick sturdy table (for example for routing out openings after sheathing, with a Triad Handlebar Router). The Pop-Up Friction Station, sits in the middle of any roller conveyor or skate wheel conveyor. When desired, it can pop-up a sheathed wall …

Description

Triad’s The Generation 3 Squaring/Sheathing Table is available for wall heights up to 16’ 3" and wall lengths up to 80’. It allows you to free up your framing table for the next wall panel, while giving you a separate table upon which to sheath (and optionally, router-out openings).

This table is a perfect match for our Generation 3 Framing Table. Your wall panel is …

Description

Take all time-consuming walls off the primary productions line with the Triad Rake Wall Table. This table produces accurate, quality rake walls and balloon walls that help you focus on your overall lineal footage output to make a more consistent product.

The table has a manually adjustable rake side, 0 to 12/12 pitch.

There are tool dollies, each holds a nailing tool, on the straight …